Kia Picanto: Chassis / Brake Lines, Hoses and Connections
Repair procedures
Visually check for proper installation, chafing, cracks, deterioration and any leakage.
Replace any deteriorated or damaged parts immediately.
Repair procedures
Inspection
Check
the brake fluid level in the brake fluid reservoir. The level should be
between “MIN” and “MAX” marks on the side of the reservoir.
Use only h ...
Repair procedures
Inspection
Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage.
Front Brake
Front brake disc thickness check
1. Check the brake ...
Other information:
Repair procedures
Inspection
Battery Voltage and Status
Check the battery voltage and status using the battery tester.
Battery Terminal
1. Move back and forth to check that the battery terminals (A) are loose or corroded.If the terminals are corroded, clean them.
If
battery positi ...
1. Open the tailgate.
2. Loosen the light assembly retaining
screws with a cross-tip screwdriver.
3. Remove the rear combination lamp
assembly from the body of the vehicle.
4. Disconnect the rear combination
lamp connector.
5. Remove the socket from the assembly
by turning the sock ...