Kia Picanto: Chassis / Drive Shafts and Boots
Repair procedures
1. | Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks or damage.
|
Repair procedures
Inspection
Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage.
Front Brake
Front brake disc thickness check
1. Check the brake ...
Repair procedures
Inspection
Check
whether the stroke is within specification when the parking brake lever
is depressed with 44 lbf, 196 N(20 kgf) of force. Also, the parking
brake alone s ...
Other information:
To stop the engine in idle stop
mode
Manual transaxle
1. Decrease the vehicle speed to less
than 5 km/h.
2. Shift into N (Neutral) position.
3. Release the clutch pedal.
Automatic transaxle
1. Decrease the vehicle speed to less
than 5 km/h.
2. Press the brake pedal.
The engine will s ...
Components and components location
Component Location
1. Hood latch release handle
Repair procedures
Replacement
1. Using a remover, remove the hood release handle (A).
2. Install in the reverse order of removal.
•
M ...