Kia Picanto: Door locks / Operating door locks from
outside the vehicle
Mechanical key
- Turn the key toward the rear of the
vehicle to lock and toward the front
of the vehicle to unlock.
- If you lock/unlock the door with a
key, the doors will lock/unlock.
- If you lock/unlock the driver’s door
with a key, all vehicle doors will lock/
unlock automatically. (if equipped)
- From the driver’s door, turn the key
toward the front of the vehicle once
to unlock the driver’s door and once
more within 4 seconds to unlock all
doors. (if equipped)
- Once the doors are unlocked, they
may be opened by pulling the door
handle.
- When closing the door, push the door
by hand. Make sure that doors are
closed securely.
Transmitter/Smart key
- Doors can be locked and unlocked
with the transmitter (or smart key).
(if equipped)
- Doors can be locked and unlocked
pressing the button of the outside
door handle with the smart key in
your possession.
- From the driver's door, press the unlock
button once to unlock the driver's
door and once more within
4 seconds to unlock all doors. (if
equipped)
- Once the doors are unlocked, they
may be opened by pulling the door
handle.
- When closing the door, push the door
by hand. Make sure that doors are
closed securely.
NOTICE
- In cold and wet climates, door
locks and door mechanisms may
not work properly due to freezing
conditions.
- If the door is locked/unlocked multiple
times in rapid succession with
either the vehicle key or door lock
switch, the system may stop operating
temporarily in order to
protect the circuit and prevent
damage to system components.
WARNING
- If you don't close the door securely,
the door may open again.
- Be careful that someone's body
and hands are not trapped when
closing the door.
WARNING
If people must spend a longer time in
the vehicle while it is very hot or cold
outside, there is rick of injuries or
danger to life. Do not lock the vehicle
from the outside when there are
people in it.
CAUTION
Do not frequently repeat opening
and closing of doors, or apply excessive
force to a door while the door
closer is operating.
With the door lock button
To unlock a door, pull the door lock
button (1) to the “Unlock” position.
The red mark on the button will be
visible.
To lock a door, push the door lock ...
Other information:
Description and operation
Description
•
The front impact sensor (FIS) is installed in the Front End Module (FEM).
•
FIS is a remote sensor that detects acceleration due to a collision at its mounting location.
•
...
Repair procedures
Removal and Installation
1.Remove the cylinder head assembly.
(Refer to Cylinder Head Assembly - "Cylinder Head")
2.Remove the water jacket insert inlet (A) and water jacket insert (B).
Be careful not to deform or damage it when rem ...