Components |
1. Door lock/unlock knob cable 2. Door inside handle cable | 3. Door latch assembly |
Inspection |
|
1. | Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
2. | Remove the front door trim seal.
(Refer to Body - "Front Door Window Glass")
|
3. | Disconnect the connector from the actuator.
|
4. | Check
actuator operation by connecting power and ground as shown below. To
prevent damage to the actuator, apply battery voltage only momentarily. [Connector 6 pin Type]
[Connector 4 pin Type]
[Connector 2 pin Type]
|
1. | Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
|
2. | Remove the rear door trim seal.
(Refer to Body - "Rear Door Window Glass")
|
3. | Disconnect the connector from the actuator.
|
4. | Check
actuator operation by connecting power and ground as shown below. To
prevent damage to the actuator, apply battery voltage only momentarily. [Connector 4 pin Type]
[Connector 2 pin Type]
|
1. | Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
|
2. | Disconnect the connectors from the actuator.
|
3. | Check
actuator operation by connecting power and ground as shown below. To
prevent damage to the actuator, apply battery voltage only momentarily.
|
4. | Checking the tailgate of the vehicle power option power refers to the tailgate module. |