Kia Picanto: Power Door Mirrors / Power Door Mirror Actuator
Components and components location
Repair procedures
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the front door quadrant inner cover (A).
|
3. | Disconnect the tweeter speaker connector (A).
|
4. | Disconnect the power door mirror connector from the harness.
|
5. | Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly. [Mirror Control (LH/RT)]
[Mirror Heater]
[Side Repeater Lamp]
[Folding Mirror]
|
Components and components location
Component
Schematic diagrams
Circuit Diagram
[Folding Mirror Type]
[Non-Folding Mirror Type]
Repair procedures
Inspe ...
Components and components location
Component Location
1. Driver power window switch 2. Assist power window switch 3. Rear power window switch 4. Front window motor 5. Rear window motor
...
Other information:
Repair procedures
Inspection
•
Wrap
tin foil around the end of the voltmeter test lead to prevent damaging
the heater line. Apply pressure on the tin foil with hand and move the
tin foil along the grid line to check for open circuits. ...
Components and components location
Component Location
1. Hood assembly
Repair procedures
Replacement
Be careful not to damage the hood and body.
•
Work in a group of two when removing and instal ...