Kia Picanto: What to do in an emergency / Road warning
Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise
extreme
caution when approaching, overtaking,
or passing your vehicle.
It should be used whenever emergency
repairs are being made or when the vehicle
is stopped near the edge of a
roadway.
Depress the flasher switch with the ignition
switch in any position. The flasher
switch is located in the center console
switch panel. All turn signal lights
will flash simultaneously.
- The hazard warning flasher operates
whether your vehicle is running or
not.
- The turn signals do not work when
the hazard flasher is on.
- Care must be taken when using the
hazard warning flasher while the vehicle
is being towed.
If the engine stalls at a
crossroad or crossing
If the engine stalls at a crossroad or
crossing, set the shift lever in the N
(Neutral) position and then push the
vehicle to a safe plac ...
Other information:
To adjust the headlight beam level according
to the number of the passengers
and loading weight in the luggage
area, turn the beam leveling switch.
The higher the number of the switch
position, the lower the headlight beam
level. Always keep the headlight beam
at the proper leveling p ...
13. Immediately drive approximately
7~10 km (4~6 miles or, about 10
min) to evenly distribute the sealant
in the tire.
CAUTION
Do not exceed a speed of 60 km/h
(35 miles). If possible, do not fall below
a speed of 20 km/h (12 miles).
While driving, if you experience any
unusual vibrat ...