Kia Picanto: Tires and wheels / Checking tire inflation pressure
Check your tires once a month or more.
Also, check the tire pressure of the
spare tire.
How to check
Use a good quality gauge to check tire
pressure. You can not tell if your tires
are properly inflated simply by looking
at them. Radial tires may look properly
inflated even when they're underinflated.
Check the tire's inflation pressure when
the tires are cold. - "Cold" means your
vehicle has been sitting for at least
three hours or driven no more than 1.6
km (1 mile).
Remove the valve cap from the tire
valve stem. Press the tire gauge firmly
onto the valve to get a pressure measurement.
If the cold tire inflation pressure
matches the recommended pressure
on the tire and loading information
label, no further adjustment is necessary.
If the pressure is low, add air until
you reach the recommended amount.
If you overfill the tire, release air by
pushing on the metal stem in the center
of the tire valve. Recheck the tire
pressure with the tire gauge. Be sure to
put the valve caps back on the valve
stems. They help prevent leaks by
keeping out dirt and moisture.
WARNING
- Inspect your tires frequently for
proper inflation as well as wear
and damage. Always use a tire
pressure gauge.
- Tires with too much or too little
pressure wear unevenly causing
poor handling, loss of vehicle control,
and sudden tire failure leading
to accidents, injuries, and even
death. The recommended cold tire
pressure for your vehicle can be
found in this manual and on the
tire label located on the driver's
side center pillar.
- Worn tires can cause accidents.
Replace tires that are worn, show
uneven wear, or are damaged.
- Remember to check the pressure
of your spare tire. Kia recommends
that you check the spare
every time you check the pressure
of the other tires on your vehicle.
All tire pressures (including the spare)
should be checked when the tires are
cold. “Cold Tires” means the vehicle has
not been driven for at least three hours
or driven less than 1.6 km ( ...
To equalize tread wear, it is recommended
that the tires be rotated every
10,000 km (6,500 miles) or sooner if irregular
wear develops.
During rotation, check the tires for correct
balance.
...
Other information:
The heating and cooling system can be
controlled manually by pushing buttons
other than the AUTO button. In this
case, the system works sequentially
according to the order of buttons selected.
When pressing any button (or turning
any knob) except the AUTO button
while using automatic op ...
To defog inside windshield
1. Select any fan speed except “0” position.
2. Select desired temperature.
3. Select the or
position.
4. The outside (fresh) air and air conditioning
will be selected automatically.
If the air conditioning and outside
(fresh) air position are not selecte ...