Kia Picanto: Floor Console / Console Armrest
Components and components location

Repair procedures
Put on gloves to protect your hands. |
•
| Use a plastic panel removal tool to remove interior trim pieces without marring the surface. |
•
| Be careful not to bend or scratch the trim and panels. |
|
1. | Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
|
2. | Remove the rear console cover.
(Refer to Floor Console - "Rear Console Cover")
|
3. | Loosen the mounting screws (A) and remove the console armrest (B).
 |
4. | Install in the reverse order of removal. Replace any damaged clips. |
|
Components and components location
Component Location
1. Rear console cover
Repair procedures
Replacement
Put on gloves to protect your hands.
...
Components and components location
Components
1. Front bumper cover assembly 2. Front bumper upper side bracket 3. Front bumper side bracket 4. Front bumper energy absorber
...
Other information:
Repair procedures
Removal and Installation
1.Remove the oil level gauge (A).
2.Remove the timing chain cover & oil pump assembly.
(Refer to Timing System - "Timing Chain Cover & Oil Pump Assembly")
3.Remove the oil level gauge guide (A).
Tightening tor ...
Refrigerant label
The refrigerant label is located on the
underside of the hood.
Declaration of conformity
The radio frequency components of the
vehicle comply with requirements and
other relevant provisions of Directive
1995/5/EC.
Further information including the manufacturer's
d ...