Kia Picanto: Body (Interior and Exterior)
Kia Picanto JA 2017-2024 Service & Repair Manual / Body (Interior and Exterior)
Specifications
| Specifications |
|
Items
|
Specification
| |
| Hood | Type | Rear hinged, gas lifter type |
| Front Door | Construction | Front hinged, frame door construction |
| Regulator system | Wire drum type | |
| Locking system | Pin-fork system | |
| Rear Door | Construction | Front hinged, frame door construction |
| Regulator system | Wire drum type | |
| Locking system | Pin-fork system | |
| Tail Gate | Type | Front hinged, gas lifter type |
| Seat Belts | Front | 3 point type with Emergency Locking Retractor (E.L.R.) |
| Rear | 3 point type with Emergency Locking Retractor (E.L.R.) | |
| Tightening Torque |
|
Items
|
N·m
|
kgf·m
|
lb·ft
| |
| Front and rear doors | Door hinge to door | 21.6 - 26.5 | 2.2 - 2.7 | 15.9 - 19.5 |
| Door checker to door | 3.9 - 5.9 | 0.4 - 0.6 | 2.9 - 4.3 | |
| Door checker to body | 19.6 - 29.4 | 2.0 - 3.0 | 14.5 - 21.7 | |
| Door glass mounting bolt | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 | |
| Outside handle base mounting bolt | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 | |
| Door channel mounting bolt and nuts | 3.9 - 5.9 | 0.4 - 0.6 | 2.9 - 4.3 | |
| Door latch mounting bolts | 7.8 - 10.8 | 0.8 - 1.1 | 5.8 - 8.0 | |
| Door module mounting bolts | 8.8 - 13.7 | 0.9 - 1.4 | 6.5 - 10.1 | |
| Door striker mounting bolts | 16.7 - 21.6 | 1.7 - 2.2 | 12.3 - 15.9 | |
| Tail gate | Tail gate hinge to body | 21.6 - 26.5 | 2.2 - 2.7 | 15.9 - 19.5 |
| Tail gate hinge to tail gate | 21.6 - 26.5 | 2.2 - 2.7 | 15.9 - 19.5 | |
| Tail gate latch mounting bolts | 10.8 - 11.8 | 1.1 - 1.2 | 8.0 - 8.7 | |
| Tail gate striker mounting bolts | 21.6 - 26.5 | 2.2 - 2.7 | 15.9 - 19.5 | |
| Hood | Hood hinge to body | 21.6 - 26.5 | 2.2 - 2.7 | 15.9 - 19.5 |
| Hood hinge to hood | 21.6 - 26.5 | 2.2 - 2.7 | 15.9 - 19.5 | |
| Hood latch to body | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 | |
| Seat | Front seat mounting bolts | 34.3 - 53.9 | 3.5 - 5.5 | 25.3 - 39.8 |
| Front seat frame mounting bolts | 44.1 - 53.9 | 4.5 - 5.5 | 32.5 - 39.8 | |
| Front seat cushion track mounting bolts | 44.1 - 53.9 | 4.5 - 5.5 | 32.5 - 39.8 | |
| Rear seat mounting bolts | 16.7 - 25.5 | 1.7 - 2.6 | 12.3 - 18.8 | |
| Rear seat latch mounting bolts | 19.6 - 29.4 | 2.0 - 3.0 | 14.5 - 21.7 | |
| Rear seat frame mounting bolts | 44.1 - 53.9 | 4.5 - 5.5 | 32.5 - 39.8 | |
| Seat belt | Height adjuster mounting bolts | 39.2 - 53.9 | 4.0 - 5.5 | 28.9 - 39.8 |
| Front seat belt upper anchor mounting bolt | 39.2 - 53.9 | 4.0 - 5.5 | 28.9 - 39.8 | |
| Front seat belt retractor mounting bolt [Upper] | 7.8 - 11.8 | 0.8 - 1.2 | 9.8 - 8.7 | |
| Front seat belt retractor mounting bolt [Lower] | 39.2 - 53.9 | 4.0 - 5.5 | 28.9 - 39.8 | |
| Rear seat belt lower anchor mounting bolts | 39.2 - 53.9 | 4.0 - 5.5 | 28.9 - 39.8 | |
| Rear seat belt retractor mounting bolt | 39.2 - 53.9 | 4.0 - 5.5 | 28.9 - 39.8 | |
| Rear center seat belt retractor mounting bolt [Lower] | 39.2 - 53.9 | 4.0 - 5.5 | 28.9 - 39.8 | |
| Rear center seat belt buckle rail mounting nut | 39.2 - 53.9 | 4.0 - 5.5 | 28.9 - 39.8 | |
| Seat belt buckle mounting bolt | 39.2 - 53.9 | 4.0 - 5.5 | 28.9 - 39.8 | |
| Outside rearview mirror | Outside rearview mirror mounting nuts | 6.9 - 10.8 | 0.7 - 1.1 | 5.1 - 8.0 |
| Wiper arm | Wiper arm mounting nuts | 22.6 - 26.5 | 2.3 - 2.7 | 16.6 - 19.5 |
| Rear spoiler | Rear spoiler mounting nuts | 5.9 - 6.4 | 0.6 - 0.65 | 4.3 - 4.7 |
| Panorama sunroof | Panorama sunroof mounting nuts | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 |
| Panorama sunroof mounting bolts | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 | |
Special service tools
| Special Service Tools |
|
Tool (Number and name)
|
Illustration
|
Use
|
| 09880-4F000 Hog ring clip installer |
| Hog ring clip installation |
Troubleshooting
| Troubleshooting |
|
Symptom
|
Suspected Area
|
Remedy
|
| Water leaks from panorama sunroof | Deteriorated roof lid weatherstrip | Replace |
| Excessive roof lid-to-body clearance and improperly fitted weatherstrip | Adjust | |
| Wind noise around panorama sunroof | Loose or deformed deflector, gaps in body work | Retighten adjust or replace |
| Noise heard when opening/closing panorama sunroof | Foreign particles lodged in guide rail | Check drive cable and guide rails for foreign particles |
| Loose guide rails and lid | Retighten | |
| Motor runs but sunroof does not move or moves only partially | Foreign particles lodged in guide rail | Adjust or replace |
| Incorrect engagement of motor pinion with drive cable | ||
| Decrease in motor's clutch slipping force | ||
| Increased
sunroof sliding resistance or interference of sunroof with drive
cables, weatherstrip, etc. due tomal adjustment of sunroof | ||
| Noise in motor (clutch slipping noise from motor when sunroof is fully opened or closed) is considered as normal | Incorrect engagement of motor pinion with drive cable | Check pinion installation and Re-tighten motor |
| Worn out or damaged motor pinion bearing | Replace motor assembly | |
| Worn out or deformed drive cable | Replace | |
| Door glass fails to operate up and down | Incorrect window glass installation | Adjust position |
| Damaged or faulty regulator arm or regulator | Correct or replace | |
| Door does not open or close completely | Incorrect door installation | Adjust position |
| Defective door check assembly | Correct or replace | |
| Door hinge requires grease | Apply grease | |
| Hood does not open or close completely | Striker and latch not properly aligned | Adjust |
| Incorrectly installed hood | Adjust | |
| Incorrect hood bumper height | Adjust | |
| Water leaks through windshield end rear window | Defective seal | Fill with sealant |
| Defective flange | Correct |
- Body Side Molding
- Cowl Top Cover
- Crash Pad
- Cluster Fascia Panel
- Center Fascia Panel
- Crash Pad Lower Panel
- Glove Box Housing
- Steering Column Shroud Panel
- Crach Pad Center Panel
- Main Crash Pad Assembly
- Cowl Cross Bar Assembly
- Fender
- Floor Carpet
- Floor Console
- Front Bumper
- Front Door
- Front Door Trim
- Front Door Inside Handle
- Front Door Window Glass
- Front Door Power Window Regulator
- Front Door Outside Handle
- Front Door Latch
- Front Door Belt Inside Weatherstrip
- Front Door Belt Outside Weatherstrip
- Front Door Side Weatherstrip
- Fuel Filler Door
- Front Seat
- Front Seat Assembly
- Front Seat Shield Outer Cover
- Front Seat Shield Inner Cover
- Front Seat Back Cover
- Front Seat Cushion Cover
- Front Seat Frame Assembly
- Front Seat Belt
- Hood
- Interior Trim
- Door Scuff Trim
- Cowl Side Trim
- Front Pillar Trim
- Center Pillar Trim
- Rear Transverse Trim
- Luggage Side Trim
- Rear Pillar Trim
- Mirror
- Sunroof
- Quarter Fixed Glass
- Rear Bumper
- Rear Door
- Rear Door Trim
- Rear Door Inside Handle
- Rear Door Window Glass
- Rear Door Power Window Regulator
- Rear Door Outside Handle
- Rear Door Latch
- Rear Door Belt Outside Weatherstrip
- Rear Door Belt Inside Weatherstrip
- Rear Door Side Weatherstrip
- Rear Seat
- Rear Seat Belt
- Roof Trim
- Tailgate
- Windshield Glass
Assist Emergency Braking(AEB) System
Description and operation
Description
–
AEB
system is designed to help avoid a potential collision or reduce its
impact when drivers applies inadequate, delaye ...
Other information:
Kia Picanto JA 2017-2024 Service & Repair Manual: Rear Washer Switch
Repair procedures Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. Rear Wiper & Washer Switch[LHD] [RHD] Inspection (With KDS/GDS) 1. In the body electrical system, failure can be quickly diagnosed b ...
Kia Picanto JA 2017-2024 Service & Repair Manual: Cylinder Block Assembly
Components and components location Components 1. Water jacket insert 2. Water jacket insert inlet 3. Cylinder block 4. O-ring 5. Oil jet 6. Thrust bearing 7. Crankshaft upper main bearing 8. Crankshaft 9. Crankshaft lower main bearing 10. Crankshaft main bearing cap 11. Ladder frame 12. Re ...
Copyright © www.kpicanto.com 2017-2024
