Kia Picanto: Body (Interior and Exterior) / Fuel Filler Door
Components and components location

Repair procedures
Use a plastic panel removal tool to remove interior trim pieces without marring the surface. |
1. | Open the fuel filler door and then filler door cap. |
2. | Remove the fuel filler door housing (A) after loosening the mounting bolts.
 |
3. | Install in the reverse order of removal. •
| Make sure the fuel filler door locks/unlocks and opens/closes properly. |
•
| Replace any damaged clips. |
|
|
Repair procedures
Replacement
1. Loosen the front door checker (A) mounting bolt.
Tightening torque :
19.6 - 29.4 N·m (2.0 - 3.0 kgf·m,14.5 - 21.7 lb·ft)
2. Detac ...
Components and components location
Components
1. Front seat inner shield cover 2. Front seat headrest 3. Front seat back covering 4. Front seat armrest 5. Front seat back heater ...
Other information:
Repair procedures
Removal
1. Disconnect the negative (-) battery terminal.
2. Remove the license lamp assembly (A) after pressing the locking pin.
3. Disconnect the license lamp connector (A).
4. Remove the license lamp bulb (B) after removing the license lamp socket (A).
Ins ...
Description and operation
Description
Driver
Anchor Pretensioner operates as well as Belt Pretensioner at the same
time If it gets into its deploy condition after a collision. It is
located at near anchor on driver seat and it is an equipment to make up
for the existing short stroke. D ...