Kia Picanto: General Information / Important Safety Notice
General information
Proper
service methods and repair procedures are essential for safe, reliable
operation of all motor vehicles as well as personal safety of the
operator. The service procedures and descriptions in this shop manual
provide general directions for a service and repair.
Procedure,
techniques, tools, and parts for service including the skill of the
technician vary. It is impossible to provide advice or caution as
to each case in this manual.
Accordingly,
anyone who intends to use a replacement part, service procedure, or
tool, which is not recommended by the vehicle manufacturer, must
first assure thoroughly that neither their personal safety nor the safe
operation of the vehicle will be first jeopardized by the replacement
part, service procedure, or tool they select.
Reminds you to be especially careful in those areas where carelessness will cause death or serious injury. |
Reminds you to be especially careful in those areas where carelessness may cause death or serious injury. |
Reminds you to be especially careful in those areas where carelessness may cause personal injury. |
Gives you information that will prevent you from making errors that could damage the vehicle. |
Gives you added information that will help you complete a particular procedure. |
The following list contains some general WARNINGS that you should follow while working on a vehicle.
•
| Always wear safety glasses for eye protection. |
•
| Use safety stands whenever a procedure requires you to be under the vehicle. |
•
| Make sure that the ignition switch is always in the OFF position, unless otherwise required by the procedure. |
•
| Set
the parking brake when working on the vehicle. If you have an automatic
transaxle, set in park unless instructed otherwise for a specific
operation. |
•
| Place supporters against the front and rear surfaces of the tires to help prevent the vehicle from moving. |
•
| Operate the engine only in a well-ventilated area to avoid the danger of carbon monoxide poisoning. |
•
| Keep yourself and your clothing away from moving parts when the engine is running, especially the drive belts. |
•
| To
prevent serious burns, avoid contact with hot metal parts such as the
radiator, exhaust manifold, tail pipe, catalytic converter and muffler.
|
•
| Do not smoke while working on a vehicle. |
•
| To avoid injury, always remove rings, watches, loose hanging jewelry, and loose clothing before beginning to work on a vehicle. |
•
| When
it is necessary to work under the hood, keep hands and other objects
clear of the radiator fan blades! Your vehicle may be equipped with a
cooling fan that may turn on, even though the ignition switch is in the
OFF position. For this reason care should be taken to ensure that the
radiator fan electric motor is completely disconnected when working
under the hood and the engine is not running. |
General information
Identification Number Locations
Protection Of The Vehicle
Always be sure to cover fenders, seats, and floor areas before starting work.
&nb ...
General information
Identification Number
Identification Number Description
Vehicle Identification Number
1. World Manufacturer Identifier (WMI) - KNA : Passenger vehicle, MPV(Multipur ...
Other information:
Components and components location
Component Location
1. Front door latch
Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior ...
Components and components location
Components
1. ESC control module (HECU) 2. Front wheel speed sensor 3. Rear wheel speed sensor
Description and operation
Description of ESC
Electronic
Stability Control (ESC) recognizes critical driving conditions, such as
panic reacti ...