Kia Picanto: Lighting / Lighting control

The light switch has a Headlight and a
Parking light position.
To operate the lights, turn the knob at
the end of the control lever to one of
the following positions:
1. Off position
2. Auto light position (if equipped)
3. Parking light position
4. Headlight position
Parking light position


When the light switch is in the parking
light position (3rd position), the tail position,
license and instrument panel
lights will turn ON.
Headlight position


When the light switch is in the headlight
position (4th position), the head,
tail, position, license and instrument
panel lights are ON.
NOTICE
The ignition switch must be in the
ON position to turn on the headlights.
Auto light position

When the light switch is in the AUTO
light position, the taillights and headlights
will be turned ON or OFF automatically
depending on the amount of
light outside the vehicle.
CAUTION
- Never place anything over sensor
(1) located on the instrument panel,
this will ensure better autolight
system control.
- Don’t clean the sensor using a window
cleaner, the cleanser may
leave a light film which could interfere
with sensor operation.
- If your vehicle has window tint or
other types of metallic coating on
the front windshield, the Auto
light system may not work properly.
When the headlight switch is in the ON
or AUTO position and all doors (and tailgate)
are closed and locked, if you press
the door unlock button on the transmitter
(or smart key), the headlight ...
To turn on the high beam headlights,
push the lever away from you when
the headlight is on. Pull it back for low
beams.
The high beam indicator will light when
the headlight high beams are ...
Other information:
The AEB is an assistant system for a
driver in a certain risky driving condition
and it does not take every responsibility
for all risks from driving condition.
The AEB monitors the driving situations
through the radar. Thus, for a situation
out of the sensing range, the AEB may
not no ...
In the O (Off) position, pull the lever
gently toward you to spray washer fluid
on the windshield and to run the wipers
1-3 cycles.
Use this function when the windshield
is dirty.
The spray and wiper operation will continue
until you release the lever.
If the washer does not work, che ...