Kia Picanto: Rear Seat / Rear Seat Cushion Cover

Kia Picanto JA 2017-2025 Service & Repair Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Cushion Cover

Components and components location
Component Location

1. Rear seat cushion cover

Repair procedures
Replacement
   
Put on gloves to protect your hands.
   
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Be careful not to bend or scratch the trim and panels.
1.
Remove the seat assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Remove the rear seat cushion cover (A) after removing the hog-ring clips on the rear of seat cushion cover.
[Back side]

[Inside]

3.
Install in the reverse order of removal.
   
Make sure that the connectors are plugged in properly.
Replace any damaged clips.
To prevent wrinkles, make sure that the material is stretched evenly over the cover (B) before securing the hog-ring clips (A).
Replace the hog-ring clips with new ones using special tool (C) (09880-4F000).

Rear Seat Back Cover
Components and components location Component Location 1. Rear seat back cover [RH] 2. Rear seat back cover [LH] Repair procedures Replacement   &nbs ...

Rear Seat Belt
...

Other information:

Kia Picanto JA 2017-2025 Service & Repair Manual: Back-up Lamp Switch


Specifications Specifications Item Specified Type ON/OFF Operating condition Reverse gear Operating voltage 10V - 15V Operating temperatures -30°C to 100°C [-30°F to 212°F]" Components and components location ...

Kia Picanto JA 2017-2025 Service & Repair Manual: Brake Pedal


Components and components location Components 1. Brake member assembly 2. Stop lamp switch 3. Brake Pedal Arm Assembly 4. Brake pedal Pad Repair procedures Removal 1. Switch "OFF" ignition and disconnect the negative (-) battery terminal. 2. Remove the crash pad lower pane ...

Copyright © www.kpicanto.com 2017-2025