Other information:
Schematic diagrams
ECM Terminal and Input/Output signal [M/T]
1. Harness Connector
2. Terminal Function [M/T]
[Connector A]
Pin No
Description
1 Ignition coil (Cylinder #3) control output 2 Ignition coil (Cylinder ...
Repair procedures
Removal and Installation
1.Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.Remove the oil pressure switch (B) after disconnecting the connector (A).
Tightening torque :
7.8 - 11. ...