Kia Picanto: Features of your vehicle / Theft-alarm system

Vehicles equipped with a theft alarm
system will have a label attached to the
vehicle with the following words:
1. WARNING
2. SECURITY SYSTEM

This system is designed to provide protection
from unauthorized entry into
the car. This system is operated in
three stages: the first is the "Armed"
stage, the second is the "Theft-alarm"
stage, and the third is the "Disarmed"
stage. If triggered, the system provides
an audible alarm with blinking of the
hazard warning lights.
NOTICE
If, for some reason, you happen to
lose your smart key, you will not
be able to start the engine. Tow
the vehicle, if necessary, contact a
professional workshop. Kia recommends ...
Using the smart key
Park the vehicle and stop the engine.
Arm the system as described below.
1. Turn off the engine.
2. Make sure that all doors (and tailgate)
and the engine hood are
closed ...
Other information:
Components and components location
Components
Repair procedures
Removal
1.Remove the brake fluid level sensor connector.
2.Remove the brake fluid from the master cylinder reservoir with a syringe.
Do
not spill brake fluid on the vehicle as it may dam ...
Description and operation
Description
The
SRSCM shall monitor the status of the driver and front passenger seat
belt buckle. The SRSCM provides one pin each for the driver and front
passenger seat belt buckle status input. The seat belt buckle circuit
operates from internal boost volta ...