Kia Picanto: Smart key / Smart key precautions
NOTICE
- If, for some reason, you happen to
lose your smart key, you will not
be able to start the engine. Tow
the vehicle, if necessary, contact a
professional workshop. Kia recommends
to contact an authorized
Kia dealer/service partner.
- A maximum of 2 smart keys can
be registered to a single vehicle. If
you lose a smart key, Kia recommends
to contact an authorized
Kia dealer/service partner.
- The smart key will not work if any
of the following occurs:
- The smart key is close to a radio
transmitter such as a radio
station or an airport which can
interfere with normal operation
of the smart key.
- The smart key is near a mobile
two-way radio system or a cellular
phone.
- Another vehicle’s smart key is
being operated close to your
vehicle.
When the smart key does not
work properly, open and close the
door with the mechanical key. If
you have a problem with the
smart key, Kia recommends to
contact an authorized Kia dealer/
service partner.
- If the smart key is in close proximity
to your cell phone or smart
phone, the signal from the smart
key could be blocked by normal
operation of your cell phone or
smart phone. This is especially important
when the phone is active
such as making call, receiving calls,
text messaging, and/or sending/
receiving emails. Avoid placing the
smart key and your cell phone or
smart phone in the same pants or
jacket pocket and maintain adequate
distance between the two
devices.
CAUTION
Keep the smart key away from water
or any liquid. If the keyless entry
system is inoperative due to exposure
to water or liquids, it will not be
covered by your manufacturer’s vehicle
warranty.
Carrying the smart key, you may lock
and unlock the vehicle doors (and tailgate).
Also, you may start the engine.
Refer to the following, for more details.
Locking
Pressing the button of the ...
Vehicles equipped with a theft alarm
system will have a label attached to the
vehicle with the following words:
1. WARNING
2. SECURITY SYSTEM
This system is designed to provide protection
...
Other information:
Repair procedures
Removal and Installation
1.Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.Using the wrench, turning the auto tensioner pulley (A) counterclockwise and then insert a stopper pin (B) into the hole.
...
Filter replacement
It must be replaced when necessary,
and should not be washed.
You can clean the filter when inspecting
the air cleaner element.
Clean the filter by using compressed
air.
1. Loosen the air cleaner cover attaching
clips and remove the air
cleaner hose.
2. Wipe t ...