Kia Picanto: Front Bumper / Radiator Grille

Kia Picanto JA 2017-2025 Service & Repair Manual / Body (Interior and Exterior) / Front Bumper / Radiator Grille

Components and components location
Component Location

1. Radiator Grille


Repair procedures
Replacement
   
Put on gloves to protect your hands.
   
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Be careful not to bend or scratch the trim and panels.
1.
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Assembly")
2.
Loosen the mounting screws and remove the radiator grille upper cover (A).

3.
Remove the front bumper lower grille (A).

4.
Install in the reverse order of removal.
   
Make sure the connector is connected properly.
Replace any damaged clips.
Front Bumper Assembly
Components and components location Component Location 1. Front bumper cover Repair procedures Replacement    Put on gloves to protect your hands. ...

Front Door
Components and components location Components 1. Front door trim assembly 2. Front door trim mounting bracket 3. Front door panel assembly 4. Front door body side weatherstrip 5 ...

Other information:

Kia Picanto JA 2017-2025 Service & Repair Manual: Cylinder Block Assembly


Components and components location Components 1. Water jacket insert 2. Water jacket insert inlet 3. Cylinder block 4. O-ring 5. Oil jet 6. Thrust bearing 7. Crankshaft upper main bearing 8. Crankshaft 9. Crankshaft lower main bearing 10. Crankshaft main bearing cap 11. Ladder frame 12. Re ...

Kia Picanto JA 2017-2025 Service & Repair Manual: Rear Wheel Speed Sensor


Repair procedures Removal 1. Remove the wheel tire (A). Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) 2. Remove the luggage side trim. (Refer to Body - "Luggage Side Trim") 3. Disconnect the rear wheel speed sensor con ...

Copyright © www.kpicanto.com 2017-2025