Kia Picanto: LCD windows / Service Mode
Service in
It calculates and displays when you need a scheduled maintenance service (mileage or days).
If the remaining mileage or time reaches 1,500 km (900 mi.) or 30 days, “Service in” message is displayed for several seconds each time you set the ignition switch or Engine Start/Stop Button to the ON position.
NOTICE
If any of the following conditions occurs, the mileage and days may be incorrect.
- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.
LCD modes (for type B cluster)
1. Trip Computer mode
This mode displays driving information
like the tripmeter, fuel economy,
and so on.
For more details, refer to “Trip
Computer” on page 4-50.
2. Service mode
This ...
User Settings Mode (for type B
cluster
On this mode, you can change setting
of the doors, lamps, and so on.
WARNING
Do not adjust the User Setting while
driving. You may lose your steering
control and cause severe personal
injury ...
Other information:
Kia Picanto JA 2017-2024 Service & Repair Manual: Cooling Fan
Components and components location Components 1. Cooling fan 3. Cooling fan motor 3. Cooling fan shroud Specifications Specifications Item Specification Fan type Puller Fan speed control ON - OFF Air flow rat ...
Kia Picanto JA 2017-2024 Service & Repair Manual: Seat Belt Buckle Switch (BS)
Description and operation Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost volta ...
Copyright © www.kpicanto.com 2017-2024
